Telstar

naj mi kdo malo razloži kako bi lahko z eno kartico preko routerja gledo na drugem računalniku baje da se da

Jaz sem že marsikaj probal, pa mi še ni uspelo. Na ProgDVBju lahko nastaviš na prvem Broadcast server in na drugem Broadcast clienta, nastaviš IPje in porte... In kaj potem?

Menda skopiraš vse channel liste in nastavitve na drugi PC in od tam upravljaš in gledaš - tako nekako se spomnim da je nekje pisalo.

install software on server with broadcasting module
2. scan channels
3. activate broadcasting module
4. enter either client ip (for one client only) or network layer (192.168.0.255 will make a broadcast to all clients in 192.168.0.xxx)
5. install software on client (usually without the hardware drivers) with client module
6. enter the ip of server (devices list -> client -> properties)
7. broadcasting should start immediately (at least on a 100 mbit full duplex net)